| Welcome to the official Charlie Tango DX Group CB And Amateur Radio Forum. You are visiting the UK's biggest and most active CB Radio club.. We hope you enjoy your visit. Charlie Tango DX is a group dedicated to Hobby Radio Users in all forms, whether CB, Amateur, PMR446, Scanning and Short Wave Listening. We are a very active and friendly group that welcomes anyone from anywhere in the world who has an interest in Radio, regardless of their level of experience, their equipment, their location, or their radio preference. We have members varying from fully qualified operators on the Amateur Bands, to newcomers who have just bought a PMR446 set, and many CBers both old and new. All are equal on the Site. The CT Site contains many reviews, tips and modifications within the forums, and we take pride that no sensible question is ever left unanswered, and nobody is ever belittled or mocked for asking an honest question, no matter how simple it may seem. We were all new to the hobby once. You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join Charlie Tango you'll be able to access member-only sections, and use member-only features such as customizing your profile, sending personal messages, voting in polls, viewing modifications and more. If you are not yet a member: Registration is simple, fast, and completely free. Simply CLICK HERE to start the Registration process. Your application will need to include your personal name and approximate location, it will require you to confirm your email, and then be signed-off by one of our Admin Staff, but this is usually completed within 24 hours (48 max) |
- Pages:
- 1
- 2
| Intermediate projects | |
|---|---|
| Tweet Topic Started: Thursday, 9. February 2017, 21:34 (1,035 Views) | |
| Kaosss | Thursday, 9. February 2017, 21:34 Post #1 |
![]()
163 Charlie Tango 777
![]()
|
Thinking of going in for my intermediate, found a local club that does the training but not been there atm. Just wondered what projects anyone has done? And where to buy a kit Thanks all Al |
![]() Kenwood TS480SAT with MC90 mic, Kenwood TS590, Yaesu FT1000D with Heil mic, Yaesu FT2000D with Heil mic, RCI 2995dx, 5 eli beam on a Scam 12 pump-up mast, A99, sirio 827, G5RV and a selection of wires. For mobile/portable - Optima V3, Midland portapack with 11m dipole / inverted V on 10m pole.RM KL500 - modded. Ranger 811H amp | |
![]() |
|
| razor36 | Thursday, 9. February 2017, 22:04 Post #2 |
|
i made a few, a cw decoder was one but you could build one of those little pixie kit radio things. http://www.ebay.co.uk/itm/RADIO-40M-CW-Shortwave-Transmitter-QRP-Pixie-Kit-Receiver-7-023-7-026MHz-DIY-UK-/132032577382?hash=item1ebdc13f66:g:hmIAAOSwImRYTwjZ easy enough as parts all printed on board and you get a parts list, is a bit small and lot of soldering. Edited by razor36, Thursday, 9. February 2017, 22:08.
|
| M0LSG | |
![]() |
|
| Kaosss | Friday, 10. February 2017, 07:33 Post #3 |
![]()
163 Charlie Tango 777
![]()
|
Will have a look later today, thanks Glynn |
![]() Kenwood TS480SAT with MC90 mic, Kenwood TS590, Yaesu FT1000D with Heil mic, Yaesu FT2000D with Heil mic, RCI 2995dx, 5 eli beam on a Scam 12 pump-up mast, A99, sirio 827, G5RV and a selection of wires. For mobile/portable - Optima V3, Midland portapack with 11m dipole / inverted V on 10m pole.RM KL500 - modded. Ranger 811H amp | |
![]() |
|
| Deleted User | Friday, 10. February 2017, 09:42 Post #4 |
|
Deleted User
|
On the day of tha exam,we had to build a signal generator ........................ |
|
|
| FakeJake | Friday, 10. February 2017, 10:36 Post #5 |
![]()
|
The northwich club provided MW AM radio kits for us to assemble. Great little project |
|
Jake Monitoring 2m simplex, GB3CR & GB7HM(DMR) | |
![]() |
|
| 36Ian | Friday, 10. February 2017, 11:27 Post #6 |
![]()
|
You are lucky you can find a club that is interested in doing it. I'm having a real up hill battle, locally I've been to a couple of clubs that have shown little if no interest in helping me along the way. I've also emailed another local club at least half a dozen times with no reply and yes they are active! I've bought the intermediate book and exam secrets book from the RSGB and I'm reading through them at the moment. The difficulty comes when you have questions or wonder if you have understood something correctly. On the practical side I'm going to have to find somewhere that will observe the kit building and let me sit the exam. It looks like this will not be local despite being surrounded by clubs. I'm finding the process very frustrating! |
![]() |
|
| razor36 | Friday, 10. February 2017, 11:47 Post #7 |
|
to ian36 look up your regional geezer thingy from the rsgb and give them a ring. Region 4 Regional Manager Ian Douglas, G7MFN 07581 068 065 rm4@rsgb.org.uk District 41 (Northumberland, Tyne-and-Wear) Ian Douglas, G7MFN 07581 068 065 drm41@rsgb.org.uk District 42 (East Yorkshire) John Baines, M0JBA 01482 842 430 drm42@rsgb.org.uk District 43 (West Yorkshire) Gerald Edinburgh, G3SDY 01484 602 905 drm43@rsgb.org.uk District 44 (South Yorkshire, north-east Lincolnshire) Adrian Patton, G1BRB 01472 501 138 drm44@rsgb.org.uk District 45 (North Yorkshire) Anthony Bonney, M0RHJ 07717 617 221 drm45@rsgb.org.uk District 46 (Five Bridges) Nancy Bone, G7UUR 07990 760 920 drm46@rsgb.org.uk Edited by razor36, Friday, 10. February 2017, 11:48.
|
| M0LSG | |
![]() |
|
| 36Ian | Friday, 10. February 2017, 13:58 Post #8 |
![]()
|
I've already communicated with Ian Douglas but thanks for trying to help |
![]() |
|
| Lowflyer | Friday, 10. February 2017, 19:40 Post #9 |
|
108 Charlie Tango 036
![]()
|
I was under the impression that the intermediate project did not have to be observed during construction, and the choice of project undertaken was not set in stone and at the tutors/instructors discretion? The intermediate book contains suggestions of possible kits to use, but there are many radio projects that could be used outwith these for the course. If the instructor agrees, you could even fabricate an antenna and this maybe accepted ? In my case the tutor said the guidelines required the project to reflect the competance level required for the intermediate cirriculum, and should contain an element of soldering which would demonstrate efficiency. For my intermediate I presented several homemade baluns and calculations/results spreadsheets and this was accepted. Hope this helps. Ian, If you are still struggling for somewhere to help you out, I may have several intermediate test exam sheets I could look out and send you. I know they wont substitute having a proper instructor but better than nothing? Edited by Lowflyer, Friday, 10. February 2017, 19:41.
|
|
108CT036 "Some People are so Poor, all they have is Money!" UNIQUE CHARLIE TANGO UK FM CONTACTS - 74 Stations Worldwide -----> LIVE BROADCAST ON USTREAM <----- | |
![]() |
|
| Fixerman | Friday, 10. February 2017, 20:09 Post #10 |
|
108 Charlie Tango 300
![]()
|
Built an electronic swr meter for mine, but did it in my own time, just had to explain a little about it. Fm |
|
MM0WAX | |
![]() |
|
| Kaosss | Saturday, 11. February 2017, 16:54 Post #11 |
![]()
163 Charlie Tango 777
![]()
|
Cheers guys, best have a chat with the instructor when I meet him, may buy one from Maplins if I pass to have a practice first |
![]() Kenwood TS480SAT with MC90 mic, Kenwood TS590, Yaesu FT1000D with Heil mic, Yaesu FT2000D with Heil mic, RCI 2995dx, 5 eli beam on a Scam 12 pump-up mast, A99, sirio 827, G5RV and a selection of wires. For mobile/portable - Optima V3, Midland portapack with 11m dipole / inverted V on 10m pole.RM KL500 - modded. Ranger 811H amp | |
![]() |
|
| Sylad | Monday, 13. February 2017, 11:53 Post #12 |
![]()
|
Did mine with qrp 40M pixie kit. They are only £2 delivered from china if you can waid a few weeks for delivery. http://www.ebay.co.uk/itm/RADIO-40M-CW-Shortwave-Transmitter-QRP-Pixie-Kit-Receiver-7-023-7-026MHz-DIY-UK-/132032577382?hash=item1ebdc13f66:g:hmIAAOSwImRYTwjZ |
|
INDEED YOU ARE POWERFUL ! 26DX617 Delta-Xray Radio Club | |
![]() |
|
| Kaosss | Monday, 13. February 2017, 14:01 Post #13 |
![]()
163 Charlie Tango 777
![]()
|
£1.95 delivered, you can't buy cheaper lol, how do they do it? Cheers Simon, will order one for sure |
![]() Kenwood TS480SAT with MC90 mic, Kenwood TS590, Yaesu FT1000D with Heil mic, Yaesu FT2000D with Heil mic, RCI 2995dx, 5 eli beam on a Scam 12 pump-up mast, A99, sirio 827, G5RV and a selection of wires. For mobile/portable - Optima V3, Midland portapack with 11m dipole / inverted V on 10m pole.RM KL500 - modded. Ranger 811H amp | |
![]() |
|
| razor36 | Monday, 13. February 2017, 18:57 Post #14 |
|
a couple of the things i made, pixie kit, a radio thingy lol, and a cw decoder. http://s1301.photobucket.com/user/glynn76/media/WP_20170213_002_zps2qokmuni.jpg.html?sort=4&o=2 |
| M0LSG | |
![]() |
|
| High Voltage | Tuesday, 14. February 2017, 09:47 Post #15 |
![]()
108 Charlie Tango 054
![]()
|
I did the 40m Pixie kit thing too Al. Took me around an hour but I wasn't sweating it. It even works!! I think mine was £2.39 (also from China), so I was robbed lol. After all it's not the principal, it's the money. Good luck with the intermediate
|
|
[marq=left]Sorry sir, I've rolled the Land Rover over, over.........[/marq] | |
![]() |
|
| razor36 | Tuesday, 14. February 2017, 12:37 Post #16 |
|
i paid about a fiver for mine at the time just found another in my cupboard, i must of got 2 incase i messed up or something. dont remember building 2 though it must of been in my kit building phase. Edited by razor36, Tuesday, 14. February 2017, 12:39.
|
| M0LSG | |
![]() |
|
| Kaosss | Tuesday, 14. February 2017, 19:32 Post #17 |
![]()
163 Charlie Tango 777
![]()
|
Do you want to sell it Glynn? Dont fancy waiting for the delivery! Al |
![]() Kenwood TS480SAT with MC90 mic, Kenwood TS590, Yaesu FT1000D with Heil mic, Yaesu FT2000D with Heil mic, RCI 2995dx, 5 eli beam on a Scam 12 pump-up mast, A99, sirio 827, G5RV and a selection of wires. For mobile/portable - Optima V3, Midland portapack with 11m dipole / inverted V on 10m pole.RM KL500 - modded. Ranger 811H amp | |
![]() |
|
| SydtheCat | Tuesday, 14. February 2017, 19:39 Post #18 |
![]()
26 Charlie Tango 483
![]()
|
Paid about £10 for my project kit and it came already assembled Job sorted and happy days Mind you the exam itself was a bit tough but made it just! Good luck Al matey Craig |
Yaesu FTdx 3000 - Sirio GM - MD 200 mic | |
![]() |
|
| razor36 | Tuesday, 14. February 2017, 21:14 Post #19 |
|
i meant i built both of them for some reason al, 1 must of been a practice run. |
| M0LSG | |
![]() |
|
| razor36 | Tuesday, 14. February 2017, 21:16 Post #20 |
|
you can get 1 from england but £5.89 http://www.ebay.co.uk/itm/40-Mtr-Ham-Radio-Transceiver-QRP-PIXIE-Kit-BNC-Connector-instructions-UK-Seller-/371781192536?hash=item568fe2cb58:g:MBcAAOSw44BYGOGw |
| M0LSG | |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| Go to Next Page | |
| « Previous Topic · Amateur Radio (Public) Forums · Next Topic » |
- Pages:
- 1
- 2
| Track Topic · E-mail Topic |
7:35 PM Jul 11
|
All Rights Reserved - No Part Of This Site May Be Copied Without Prior Written Permission. CharlieTango.co.uk have a legal Common Law Trademark and Registered Copyright #S0RN-LTC9-8CXT-LZLU of the brand "Charlie Tango" since 2009 and related Copyrights in place for domain names, Logos, images, format and layout of this website and associated material. charlietango.co.uk & charlietango.uk
View My Stats
DOMAIN NAMES FOR SALE
ConspiracyEffect.com | V5Bid.com Auction | 041183.com | Hiya.Mobi | VR Portal.Net | TrainerSox.com | CoinStealth.com | ChoccyBox.com Domains | FlutterBets.com | CharlieTango.UK | HallmarkedGold.com | MozSubmit.com | HorizontalEarth.com
CharlieTango.co.uk contact email leewardill@gmail.com












7:35 PM Jul 11